Now Yous Know Reset Canon Ip1200
Problem:
Waste ink tank full, waste matter ink pad full, the ink absorber is well-nigh full, error 5B00, error P07, blink seven times, blink 8 times, the ink absorber becomes almost full, error E08, error E07, error 6C10, error 5B02.
Printer:
Canon Pixma iP1200
Reset Canon iP1200
Step 1: Enter Service Mode
1. Turn off the printer.
2. Press together with concord the Resume button.
3. Press together with concord the Power button.
4. Release the Resume push (the Power push is nevertheless pressed).
5. Press together with releasing the Resume push 1 time.
6. Press together with concord the Resume button.
7. Release the Power together with Resume buttons together.
After the both buttons are released, the ability indicator volition blink greenish for unopen to fourth dimension together with and then the greenish volition lite constantly.
If afterwards follow points 1-7 the greenish lite non constantly exactly the printer continues to demonstrate an error, it's hateful you lot made a error inwards points 1-7. Turn off the printer together with repeat pace 1.
Step 2: Reset Canon iP1200 series
To reset the Canon iP1200 can live on done alongside (select one):
a. General Tool v1.29
b. iPTool v0.9.2
c. iPTool v1.1.5
d. Service Tool av.300
e. Service Tool av.700
f. Service Tool v.4905
a. Reset alongside General Tool v1.29
· Extract file together with opened upwards General Tool.
· Select USB Port (1)
· Device ID (2)
· Lock Release (3)
· Set Destination, select printer model (4)
· Load Paper to the printer
· Clear waste matter ink counter, select MAIN (5), facial expression for the printer to complete printing
· Close General Tool (6)
· Turn off printer (wait x seconds)
· Turn on printer.
· Printer produce for use.
b. Reset alongside iPTool v0.9.2
· Extract file together with opened upwards iPTool.
· Click printer model (1)
· Waste ink counter, Reset Main (2)
· Exit iPTool (3)
· Turn off printer (wait x seconds)
· Turn on printer.
· Printer produce for use.
c. Reset alongside iP Tool v1.1.5
· Extract file together with opened upwards iPTool.
· Click printer model (1)
· Waste ink counter, Reset Main (2)
· Exit iPTool (3)
· Turn off printer (wait x seconds)
· Turn on printer.
· Printer produce for use.
d. Reset alongside Service Tool av.300
· Extract file together with opened upwards Service Tool
· Select USB Port (1)
· Device ID (2)
· Lock Release (3)
· Set Destination, select printer model (4)
· Click SET (5)
· Load Paper to the printer
· Clear waste matter ink counter, select MAIN (6), facial expression for the printer to complete printing
· Close Service Tool (7)
· Turn off printer (wait x seconds)
· Turn on printer.
· Printer produce for use
e. Reset alongside Service Tool av.700
· Extract file together with opened upwards Service Tool
· Select USB Port (1)
· Device ID (2)
· Lock Release (3)
· Set Destination, select printer model (4)
· Click SET (5)
· Load Paper to the printer
· Clear waste matter ink counter, select MAIN (6), facial expression for the printer to complete printing
· Close Service Tool (7)
· Turn off printer (wait x seconds)
· Turn on printer.
· Printer produce for use
f. Reset alongside Service Tool v.4905
· Extract file together with opened upwards Service Tool
· Load paper
· Clear Ink Counter, select MAIN (1)
· Set (2)
· Wait the printer complete printing D=000.0
· Click OK
· Close Service Tool
· Turn off printer (wait x seconds)
· Turn on printer
· Printer produce for use