Now You Lot Know Reset Canon G3000, G3100, G3200, G3400, G3500, G3900
Problem:
Waste ink tank full, waste materials ink pad full, the ink absorber is nearly full, error 5B00, error P07, blink vii times, blink 8 times, the ink absorber becomes almost full, error E08, error E07.
Printer:
Canon Pixma G3000, G3100, G3200, G3400, G3500, G3900
Reset Canon G3000, G3100, G3200, G3400, G3500, G3900
Step 1: Enter Service Mode
1. Turn off the printer.
2. Press as well as concur the Stop button.
3. Press as well as concur the Power button.
4. Release the Stop push (the Power push is nevertheless pressed).
5. Press as well as releasing the Stop push four times.
6. Press as well as concur the Stop button.
7. Release the Power as well as Stop buttons together.
After the both buttons are released, the ability indicator volition blink greenish for about fourth dimension as well as therefore the greenish volition low-cal constantly.
If subsequently follow points 1-7 the greenish low-cal non constantly exactly the printer continues to demo an error, it's hateful you lot made a error inwards points 1-7. Turn off the printer as well as repeat pace 1.
Step 2: Reset Canon G3000 series
To reset the Canon G3000, G3100, G3200, G3400, G3500, G3900 can live on done alongside (select one):
a. Service Tool v.3900
b. Service Tool v.4720
c. Service Tool v.4905
a. Reset alongside Service Tool v.3900
· Extract file as well as opened upwards Service Tool
· Load paper
· Clear Ink Counter, select MAIN (1)
· Set (2)
· Wait the printer complete printing D=000.0
· Click OK
· Close Service Tool
· Turn off printer (wait ten seconds)
· Turn on printer
· Printer gear upwards for use
b. Reset alongside Service Tool v.4720
· Extract file as well as opened upwards Service Tool
· Load paper
· Clear Ink Counter, select MAIN (1)
· Set (2)
· Wait the printer complete printing D=000.0
· Click OK
· Close Service Tool
· Turn off printer (wait ten seconds)
· Turn on printer
· Printer gear upwards for use
c. Reset alongside Service Tool v.4905
· Extract file as well as opened upwards Service Tool
· Load paper
· Clear Ink Counter, select MAIN (1)
· Set (2)
· Wait the printer complete printing D=000.0
· Click OK
· Close Service Tool
· Turn off printer (wait ten seconds)
· Turn on printer
· Printer gear upwards for use