Now Y'all Know Reset Canon Ix6800, Ix6820, Ix6840, Ix6850, Ix6870
Problem:
Waste ink tank full, waste materials ink pad full, the ink absorber is nearly full, error 5B00, error P07, blink seven times, blink 8 times, the ink absorber becomes almost full, error E08, error E07.
Printer:
Canon Pixma iX6800, iX6820, iX6840, iX6850, iX6870
Reset Canon iX6800, iX6820, iX6840, iX6850, iX6870
Step 1: Enter Service Mode
1. Turn off the printer.
2. Press too concord the Resume button.
3. Press too concord the Power button.
4. Release the Resume push (the Power push is withal pressed).
5. Press too releasing the Resume push four times.
6. Press too concord the Resume button.
7. Release the Power too Resume buttons together.
After the both buttons are released, the ability indicator volition blink dark-green for or hence fourth dimension too hence the dark-green volition lite constantly.
If later follow points 1-7 the dark-green lite non constantly only the printer continues to demo an error, it's hateful you lot made a fault inward points 1-7. Turn off the printer too repeat pace 1.
Step 2: Reset Canon iX6800 series
To reset the Canon iX6800, iX6820, iX6840, iX6850, iX6870 can live on done amongst (select one):
a. Service Tool v.3400
b. Service Tool v.3900
c. Service Tool v.4720
d. Service Tool v.4905
a. Reset amongst Service Tool v.3400
· Extract file too opened upwardly Service Tool
· Load paper
· Clear Ink Counter, select MAIN (1)
· Set (2)
· Wait the printer complete printing D=000.0
· Click OK
· Close Service Tool
· Turn off printer (wait ten seconds)
· Turn on printer
· Printer laid upwardly for use
b. Reset amongst Service Tool v.3900
· Extract file too opened upwardly Service Tool
· Load paper
· Clear Ink Counter, select MAIN (1)
· Set (2)
· Wait the printer complete printing D=000.0
· Click OK
· Close Service Tool
· Turn off printer (wait ten seconds)
· Turn on printer
· Printer laid upwardly for use
c. Reset amongst Service Tool v.4720
· Extract file too opened upwardly Service Tool
· Load paper
· Clear Ink Counter, select MAIN (1)
· Set (2)
· Wait the printer complete printing D=000.0
· Click OK
· Close Service Tool
· Turn off printer (wait ten seconds)
· Turn on printer
· Printer laid upwardly for use
d. Reset amongst Service Tool v.4905
· Extract file too opened upwardly Service Tool
· Load paper
· Clear Ink Counter, select MAIN (1)
· Set (2)
· Wait the printer complete printing D=000.0
· Click OK
· Close Service Tool
· Turn off printer (wait ten seconds)
· Turn on printer
· Printer laid upwardly for use