Now You Lot Know Reset Canon Ip1600
Problem:
Waste ink tank full, waste matter ink pad full, the ink absorber is close full, error 5B00, error P07, blink seven times, blink 8 times, the ink absorber becomes almost full, error E08, error E07, error 6C10, error 5B02.
Printer:
Canon Pixma iP1600
Reset Canon iP1600
Step 1: Enter Service Mode
1. Turn off the printer.
2. Press as well as concur the Resume button.
3. Press as well as concur the Power button.
4. Release the Resume push (the Power push is nonetheless pressed).
5. Press as well as releasing the Resume push 1 times.
6. Press as well as concur the Resume button.
7. Release the Power as well as Resume buttons together.
After the both buttons are released, the ability indicator volition blink light-green for around fourth dimension as well as and hence the light-green volition lite constantly.
If afterward follow points 1-7 the light-green lite non constantly simply the printer continues to exhibit an error, it's hateful you lot made a error inward points 1-7. Turn off the printer as well as repeat pace 1.
Step 2: Reset Canon iP1600 series
To reset the Canon iP1600 can live on done amongst (select one):
a. General Tool v1.29
b. iPTool v0.9.2
c. iPTool v1.1.5
d. Service Tool av.300
e. Service Tool av.700
f. Service Tool v.4905
a. Reset amongst General Tool v1.29
· Extract file as well as opened upwards General Tool.
· Select USB Port (1)
· Device ID (2)
· Lock Release (3)
· Set Destination, select printer model (4)
· Load Paper to the printer
· Clear waste matter ink counter, select MAIN (5), expect for the printer to complete printing
· Close General Tool (6)
· Turn off printer (wait x seconds)
· Turn on printer.
· Printer laid upwards for use.
b. Reset amongst iPTool v0.9.2
· Extract file as well as opened upwards iPTool.
· Click printer model (1)
· Waste ink counter, Reset Main (2)
· Exit iPTool (3)
· Turn off printer (wait x seconds)
· Turn on printer.
· Printer laid upwards for use.
c. Reset amongst iP Tool v1.1.5
· Extract file as well as opened upwards iPTool.
· Click printer model (1)
· Waste ink counter, Reset Main (2)
· Exit iPTool (3)
· Turn off printer (wait x seconds)
· Turn on printer.
· Printer laid upwards for use.
d. Reset amongst Service Tool av.300
· Extract file as well as opened upwards Service Tool
· Select USB Port (1)
· Device ID (2)
· Lock Release (3)
· Set Destination, select printer model (4)
· Click SET (5)
· Load Paper to the printer
· Clear waste matter ink counter, select MAIN (6), expect for the printer to complete printing
· Close Service Tool (7)
· Turn off printer (wait x seconds)
· Turn on printer.
· Printer laid upwards for use
e. Reset amongst Service Tool av.700
· Extract file as well as opened upwards Service Tool
· Select USB Port (1)
· Device ID (2)
· Lock Release (3)
· Set Destination, select printer model (4)
· Click SET (5)
· Load Paper to the printer
· Clear waste matter ink counter, select MAIN (6), expect for the printer to complete printing
· Close Service Tool (7)
· Turn off printer (wait x seconds)
· Turn on printer.
· Printer laid upwards for use
f. Reset amongst Service Tool v.4905
· Extract file as well as opened upwards Service Tool
· Load paper
· Clear Ink Counter, select MAIN (1)
· Set (2)
· Wait the printer complete printing D=000.0
· Click OK
· Close Service Tool
· Turn off printer (wait x seconds)
· Turn on printer
· Printer laid upwards for use