Now You Lot Know Reset Canon Ip90, Ip90v
Problem:
Waste ink tank full, waste product ink pad full, the ink absorber is close full, error 5B00, error P07, blink seven times, blink 8 times, the ink absorber becomes almost full, error E08, error E07, error 6C10, error 5B02.
Printer:
Canon Pixma iP90, iP90v
Reset Canon iP90, iP90v
Step 1: Enter Service Mode
1. Turn off the printer.
2. Press together with concur the Resume button.
3. Press together with concur the Power button.
4. Release the Resume push (the Power push is all the same pressed).
5. Press together with releasing the Resume push one time.
6. Press together with concur the Resume button.
7. Release the Power together with Resume buttons together.
After the both buttons are released, the ability indicator volition blink greenish for but about fourth dimension together with and then the greenish volition low-cal constantly.
If later on follow points 1-7 the greenish low-cal non constantly but the printer continues to demo an error, it's hateful you lot made a fault inwards points 1-7. Turn off the printer together with repeat stride 1.
Step 2: Reset Canon iP90, iP90v series
8. Press the Stop/Reset push iv times (each fourth dimension the Stop/Reset push is pressed, the ability indicator changes color).
9. Press the On/Off push one fourth dimension to confirm the selected activity (reset the absorber counter).
10. Press the On/Off push two times to plow off the printer.
11. Turn on the printer together with right away the printer is create for use.
Another ascendance for points 8:
Press the Stop/Reset button: 1 times – Orange – Service exam impress (load newspaper earlier produce it)
Press the Stop/Reset button: 2 times – Green – EEPROM information impress (load newspaper earlier produce it)
Press the Stop/Reset button: 3 times – Orange – EEPROM initialization
Press the Stop/Reset button: 4 times – Green – Waste ink counter setting
Press the Stop/Reset button: 5 times – Orange – Destination setting (then Press Power, Press Stop/Reset 3x)
Press the Stop/Reset button: 6 times – Green – Print caput deep cleaning
Press the Stop/Reset button: 11-13 times – Orange, Green, Orange – Return to bill of fare selection
Press the Stop/Reset button: 14 times – Green – Left margin correction