Now You Lot Know Reset Canon Ip2500, Ip2580
Problem:
Waste ink tank full, waste materials ink pad full, the ink absorber is most full, error 5B00, error P07, blink vii times, blink 8 times, the ink absorber becomes almost full, error E08, error E07, error 6C10, error 5B02.
Printer:
Canon Pixma iP2500, iP2580
Reset Canon iP2500, iP2580
Step 1: Enter Service Mode
1. Turn off the printer.
2. Press too concur the Resume button.
3. Press too concur the Power button.
4. Release the Resume push clit (the Power push clit is notwithstanding pressed).
5. Press too releasing the Resume push clit 1 times.
6. Press too concur the Resume button.
7. Release the Power too Resume buttons together.
After the both buttons are released, the ability indicator volition blink greenish for roughly fourth dimension too and then the greenish volition lite constantly.
If later follow points 1-7 the greenish lite non constantly exactly the printer continues to present an error, it's hateful you lot made a fault inwards points 1-7. Turn off the printer too repeat footstep 1.
Step 2: Reset Canon iP2500 series
To reset the Canon iP2500, iP2580 can locomote done amongst (select one):
a. General Tool v1.03
b. iPTool v0.9.2
c. iPTool v1.1.5
d. Service Tool av.300
e. Service Tool av.700
f. Service Tool v.4905
a. Reset amongst General Tool v1.03
· Extract file too opened upwardly General Tool.
· Select USB Port (1)
· Device ID (2)
· Lock Release (3)
· Set Destination, select printer model (4)
· Region, ASA for Asia (5)
· Click SET (6)
· Load Paper to the printer
· Clear waste materials ink counter, select MAIN (7), facial expression for the printer to complete printing
· Close General Tool (6)
· Turn off printer (wait x seconds)
· Turn on printer.
· Printer ready for use.
b. Reset amongst iPTool v0.9.2
· Extract file too opened upwardly iPTool.
· Click printer model (1)
· Waste ink counter, Reset Main (2)
· Exit iPTool (3)
· Turn off printer (wait x seconds)
· Turn on printer.
· Printer ready for use.
c. Reset amongst iP Tool v1.1.5
· Extract file too opened upwardly iPTool.
· Click printer model (1)
· Waste ink counter, Reset Main (2)
· Exit iPTool (3)
· Turn off printer (wait x seconds)
· Turn on printer.
· Printer ready for use.
d. Reset amongst Service Tool av.300
· Extract file too opened upwardly Service Tool
· Select USB Port (1)
· Device ID (2)
· Lock Release (3)
· Set Destination, select printer model (4)
· Click SET (5)
· Load Paper to the printer
· Clear waste materials ink counter, select MAIN (6), facial expression for the printer to complete printing
· Close Service Tool (7)
· Turn off printer (wait x seconds)
· Turn on printer.
· Printer ready for use
e. Reset amongst Service Tool av.700
· Extract file too opened upwardly Service Tool
· Select USB Port (1)
· Device ID (2)
· Lock Release (3)
· Set Destination, select printer model (4)
· Click SET (5)
· Load Paper to the printer
· Clear waste materials ink counter, select MAIN (6), facial expression for the printer to complete printing
· Close Service Tool (7)
· Turn off printer (wait x seconds)
· Turn on printer.
· Printer ready for use
f. Reset amongst Service Tool v.4905
· Extract file too opened upwardly Service Tool
· Load paper
· Clear Ink Counter, select MAIN (1)
· Set (2)
· Wait the printer complete printing D=000.0
· Click OK
· Close Service Tool
· Turn off printer (wait x seconds)
· Turn on printer
· Printer ready for use