Now Yous Know Reset Canon Ip2200
Problem:
Waste ink tank full, waste product ink pad full, the ink absorber is nearly full, error 5B00, error P07, blink seven times, blink 8 times, the ink absorber becomes almost full, error E08, error E07, error 6C10, error 5B02.
Printer:
Canon Pixma iP2200
Reset Canon iP2200
Step 1: Enter Service Mode
1. Turn off the printer.
2. Press in addition to concur the Resume button.
3. Press in addition to concur the Power button.
4. Release the Resume push clit (the Power push clit is yet pressed).
5. Press in addition to releasing the Resume push clit 1 times.
6. Press in addition to concur the Resume button.
7. Release the Power in addition to Resume buttons together.
After the both buttons are released, the ability indicator volition blink greenish for about fourth dimension in addition to thence the greenish volition lite constantly.
If subsequently follow points 1-7 the greenish lite non constantly simply the printer continues to demo an error, it's hateful yous made a fault inwards points 1-7. Turn off the printer in addition to repeat pace 1.
Step 2: Reset Canon iP2200 series
To reset the Canon iP2200 can endure done amongst (select one):
a. General Tool v1.29
b. iPTool v0.9.2
c. iPTool v1.1.5
d. Service Tool av.300
e. Service Tool av.700
f. Service Tool v.4905
a. Reset amongst General Tool v1.29
· Extract file in addition to opened upwards General Tool.
· Select USB Port (1)
· Device ID (2)
· Lock Release (3)
· Set Destination, select printer model (4)
· Load Paper to the printer
· Clear waste product ink counter, select MAIN (5), aspect for the printer to complete printing
· Close General Tool (6)
· Turn off printer (wait ten seconds)
· Turn on printer.
· Printer develop for use.
b. Reset amongst iPTool v0.9.2
· Extract file in addition to opened upwards iPTool.
· Click printer model (1)
· Waste ink counter, Reset Main (2)
· Exit iPTool (3)
· Turn off printer (wait ten seconds)
· Turn on printer.
· Printer develop for use.
c. Reset amongst iP Tool v1.1.5
· Extract file in addition to opened upwards iPTool.
· Click printer model (1)
· Waste ink counter, Reset Main (2)
· Exit iPTool (3)
· Turn off printer (wait ten seconds)
· Turn on printer.
· Printer develop for use.
d. Reset amongst Service Tool av.300
· Extract file in addition to opened upwards Service Tool
· Select USB Port (1)
· Device ID (2)
· Lock Release (3)
· Set Destination, select printer model (4)
· Click SET (5)
· Load Paper to the printer
· Clear waste product ink counter, select MAIN (6), aspect for the printer to complete printing
· Close Service Tool (7)
· Turn off printer (wait ten seconds)
· Turn on printer.
· Printer develop for use
e. Reset amongst Service Tool av.700
· Extract file in addition to opened upwards Service Tool
· Select USB Port (1)
· Device ID (2)
· Lock Release (3)
· Set Destination, select printer model (4)
· Click SET (5)
· Load Paper to the printer
· Clear waste product ink counter, select MAIN (6), aspect for the printer to complete printing
· Close Service Tool (7)
· Turn off printer (wait ten seconds)
· Turn on printer.
· Printer develop for use
f. Reset amongst Service Tool v.4905
· Extract file in addition to opened upwards Service Tool
· Load paper
· Clear Ink Counter, select MAIN (1)
· Set (2)
· Wait the printer complete printing D=000.0
· Click OK
· Close Service Tool
· Turn off printer (wait ten seconds)
· Turn on printer
· Printer develop for use