Now Y'all Know Reset Canon Mg2200, Mg2240, Mg2250, Mg2270

Problem:

Waste ink tank full, waste matter ink pad full, the ink absorber is well-nigh full, error 5B00, error P07, blink vii times, blink 8 times, the ink absorber becomes almost full, error E08, error E07.

Printer:

Canon Pixma MG2200, MG2240, MG2250, MG2270

Reset Canon MG2200, MG2240, MG2250, MG2270

Step 1: Enter Service Mode

1.   Turn off the printer.

2.   Press too concur the Stop/Reset  button.

3.   Press too concur the Power/On button.

4.   Release the Stop/Reset  button (the Power/On push clit is yet pressed).

5.   Press too releasing the Stop/Reset  button iv times.

6.   Press too concur the Stop/Reset  button.

7.   Release the Power/On too Stop/Reset  buttons together.

After the both buttons are released, the Power/On indicator volition blink greenish for roughly fourth dimension too and hence the greenish volition low-cal constantly.

If afterwards follow points 1-7 the greenish low-cal non constantly simply the printer continues to demonstrate an error, it's hateful yous made a error inward points 1-7. Turn off the printer too repeat footstep 1.

Step 2: Reset Canon MG2200 series

To reset the Canon MG2200, MG2240, MG2250, MG2270 can hold upwardly done (select one):

a.     Service Tool v.1074

b.     Service Tool v.3400

c.      Service Tool v.3600

d.     Service Tool v.4200

e.     Service Tool v.4720

f.       Service Tool v.4905

a.     Reset alongside Service Tool v.1074

·            Download Service Tool (support Win XP, Vista, 7, 8, 8.1, 10)

·            Extract file too opened upwardly Service Tool

·            Load paper

·            Clear Ink Counter, click MAIN (1)

·            Wait the printer complete printing D=000.0

·            Click OK

·            Close Service Tool

·            Turn off printer (wait ten seconds)

·            Turn on printer

·            Printer compass for use

b.     Reset alongside Service Tool v.3400

·            Download Service Tool (support Win XP, Vista, 7, 8, 8.1, 10)

·            Extract file too opened upwardly Service Tool

·            Load paper

·            Clear Ink Counter, select MAIN (1)

·            Set (2)

·            Wait the printer complete printing D=000.0

·            Click OK

·            Close Service Tool

·            Turn off printer (wait ten seconds)

·            Turn on printer

·            Printer compass for use

c.      Reset alongside Service Tool v.3600

·            Download Service Tool (support Win XP, Vista, 7, 8, 8.1, 10)

·            Extract file too opened upwardly Service Tool

·            Load paper

·            Clear Ink Counter, select MAIN (1)

·            Set (2)

·            Wait the printer complete printing D=000.0

·            Click OK

·            Close Service Tool

·            Turn off printer (wait ten seconds)

·            Turn on printer

·            Printer compass for use

d.     Reset alongside Service Tool v.4200

·            Download Service Tool (support Win XP, Vista, 7, 8, 8.1, 10)

·            Extract file too opened upwardly Service Tool

·            Load paper

·            Clear Ink Counter, select MAIN (1)

·            Set (2)

·            Wait the printer complete printing D=000.0

·            Click OK

·            Close Service Tool

·            Turn off printer (wait ten seconds)

·            Turn on printer

·            Printer compass for use

e.     Reset alongside Service Tool v.4720

·            Download Service Tool (support Win XP, Vista, 7, 8, 8.1, 10)

·            Extract file too opened upwardly Service Tool

·            Load paper

·            Clear Ink Counter, select MAIN (1)

·            Set (2)

·            Wait the printer complete printing D=000.0

·            Click OK

·            Close Service Tool

·            Turn off printer (wait ten seconds)

·            Turn on printer

·            Printer compass for use

f.       Reset alongside Service Tool v.4905

·            Download Service Tool (support Win XP, Vista, 7, 8, 8.1, 10)

·            Extract file too opened upwardly Service Tool

·            Load paper

·            Clear Ink Counter, select MAIN (1)

·            Set (2)

·            Wait the printer complete printing D=000.0

·            Click OK

·            Close Service Tool

·            Turn off printer (wait ten seconds)

·            Turn on printer

·            Printer compass for use

Share this post