Now Y'all Know Reset Canon Ip2600, Ip2680
Problem:
Waste ink tank full, waste product ink pad full, the ink absorber is most full, error 5B00, error P07, blink vii times, blink 8 times, the ink absorber becomes almost full, error E08, error E07, error 6C10, error 5B02.
Printer:
Canon Pixma iP2600, iP2680
Reset Canon iP2600, iP2680
Step 1: Enter Service Mode
1. Turn off the printer.
2. Press together with concur the Resume button.
3. Press together with concur the Power button.
4. Release the Resume push (the Power push is nevertheless pressed).
5. Press together with releasing the Resume push 1 times.
6. Press together with concur the Resume button.
7. Release the Power together with Resume buttons together.
After the both buttons are released, the ability indicator volition blink dark-green for to a greater extent than or less fourth dimension together with and then the dark-green volition lite constantly.
If subsequently follow points 1-7 the dark-green lite non constantly simply the printer continues to present an error, it's hateful y'all made a error inwards points 1-7. Turn off the printer together with repeat pace 1.
Step 2: Reset Canon iP2600 series
To reset the Canon iP2600, iP2680 can live on done amongst (select one):
a. iPTool v1.1.5
b. Service Tool av.300
c. Service Tool av.700
d. Service Tool v.4905
a. Reset amongst iP Tool v1.1.5
· Extract file together with opened upwardly iPTool.
· Click printer model (1)
· Waste ink counter, Reset Main (2)
· Exit iPTool (3)
· Turn off printer (wait 10 seconds)
· Turn on printer.
· Printer attain for use.
b. Reset amongst Service Tool av.300
· Extract file together with opened upwardly Service Tool
· Select USB Port (1)
· Device ID (2)
· Lock Release (3)
· Set Destination, select printer model (4)
· Click SET (5)
· Load Paper to the printer
· Clear waste product ink counter, select MAIN (6), await for the printer to complete printing
· Close Service Tool (7)
· Turn off printer (wait 10 seconds)
· Turn on printer.
· Printer attain for use
c. Reset amongst Service Tool av.700
· Extract file together with opened upwardly Service Tool
· Select USB Port (1)
· Device ID (2)
· Lock Release (3)
· Set Destination, select printer model (4)
· Click SET (5)
· Load Paper to the printer
· Clear waste product ink counter, select MAIN (6), await for the printer to complete printing
· Close Service Tool (7)
· Turn off printer (wait 10 seconds)
· Turn on printer.
· Printer attain for use
d. Reset amongst Service Tool v.4905
· Extract file together with opened upwardly Service Tool
· Load paper
· Clear Ink Counter, select MAIN (1)
· Set (2)
· Wait the printer complete printing D=000.0
· Click OK
· Close Service Tool
· Turn off printer (wait 10 seconds)
· Turn on printer
· Printer attain for use