Now Yous Know Reset Canon S300
Problem:
Waste ink tank full, waste materials ink pad full, the ink absorber is close full, error 5B00, error p07
Printer:
Canon S300
Reset Canon S300:
Step 1: Enter Service Mode
1. Turn off the printer.
2. Press as well as concur the Resume button.
3. Press as well as concur the Power button.
4. Release the Resume push (the Power push is withal pressed).
5. Press as well as releasing the Resume push 1 time.
6. Press as well as concur the Resume button.
7. Release the Power as well as Resume buttons together.
After the both buttons are released, the ability indicator volition blink light-green for approximately fourth dimension as well as and thence the light-green volition low-cal constantly.
If afterwards follow points 1-7 the light-green low-cal non constantly simply the printer continues to present an error, it's hateful y'all made a error inwards points 1-7. Turn off the printer as well as repeat footstep 1.
Step 2: Reset Canon S300
8. Press the Resume push iv times (each fourth dimension the Resume push is pressed, the ability indicator changes color).
9. Press the Power push in 1 trial to confirm the selected activity (reset the absorber counter).
10. Press the Power push to plough off the printer.
11. Turn on the printer as well as forthwith the printer is create for use.
Another ascendance for points 8:
Press the Resume button: 1 times – Orange – Service examination impress (load newspaper earlier produce it)
Press the Resume button: 2 times – Green – EEPROM information impress (load newspaper earlier produce it)
Press the Resume button: 3 times – Orange – EEPROM initialization
Press the Resume button: 4 times – Green – Waste ink counter setting
Press the Resume button: 5 times – Orange – Destination setting (then Press Power, Press Resume 3x)
Press the Resume button: 6 times – Green – Print caput deep cleaning
Press the Resume button: 11-13 times – Orange, Green, Orange – Return to card selection
Press the Resume button: 14 times – Green – Left margin correction
