Now Y'all Know Reset Canon S330
Waste ink tank full, waste materials ink pad full, the ink absorber is close full, error 5B00, error p07
Printer:
Canon S330
Reset Canon S330:
Step 1: Enter Service Mode
1. Turn off the printer.
2. Press together with concur the Resume button.
3. Press together with concur the Power button.
4. Release the Resume push (the Power push is however pressed).
5. Press together with releasing the Resume push i time.
6. Press together with concur the Resume button.
7. Release the Power together with Resume buttons together.
After the both buttons are released, the ability indicator volition blink light-green for around fourth dimension together with and thus the light-green volition low-cal constantly.
If later follow points 1-7 the light-green low-cal non constantly merely the printer continues to present an error, it's hateful yous made a error inwards points 1-7. Turn off the printer together with repeat footstep 1.
Step 2: Reset Canon S330
8. Press the Resume push iv times (each fourth dimension the Resume push is pressed, the ability indicator changes color).
9. Press the Power push i time to confirm the selected activity (reset the absorber counter).
10. Press the Power push to plough off the printer.
11. Turn on the printer together with straightaway the printer is laid for use.
Another ascendancy for points 8:
Press the Resume button: 1 times – Orange – Service examination impress (load newspaper earlier create it)
Press the Resume button: 2 times – Green – EEPROM information impress (load newspaper earlier create it)
Press the Resume button: 3 times – Orange – EEPROM initialization
Press the Resume button: 4 times – Green – Waste ink counter setting
Press the Resume button: 5 times – Orange – Destination setting (then Press Power, Press Resume 3x)
Press the Resume button: 6 times – Green – Print caput deep cleaning
Press the Resume button: 11-13 times – Orange, Green, Orange – Return to bill of fare selection
Press the Resume button: 14 times – Green – Left margin correction