Now You Lot Know How To Cook Canon Ip4500 Mistake 5B00 Or 5B01
Error 5B00 or 5B01 on iP4500 hateful ink absorber total (cycle of blinking inwards orangish too greenish seven times). Solution for this work is reset printer. Before reset printer. Turn off printer, too brand printer on Service Mode condition.
Service trend performance procedures
Ink absorber counter resetting
Service trend performance procedures
- With the printer ability turned off, piece pressing the Resume/Cancel button, press too concur the
Power button. (DO NOT unloosen the buttons). The Power LED lights inwards greenish to betoken that a
function is selectable. - While asset the Power button, unloosen the Resume/Cancel button. (DO NOT unloosen the Power
button.) - While asset the Power button, press the Resume/Cancel push two times, too hence unloosen both
the Power too Resume/Cancel buttons. (Each fourth dimension the Resume/Cancel push is pressed, the
Alarm too Power LEDs low-cal alternately, Alarm inwards orangish too Power inwards green, starting alongside Alarm
LED.) - When the Power LED lights inwards green, press the Resume/Cancel push the specified break of time(s) according to the business office listed inwards the tabular array below. (Each fourth dimension the Resume/Cancel push is
pressed, the Alarm too Power LEDs low-cal alternately, Alarm inwards orangish too Power inwards green, starting
with Alarm LED.)
Time(s) | LED indication | Function | Remarks |
0 times | Green (Power) | Power off | When the print head is not installed, the carriage returns and locks in the home position capped. |
1 time | Orange (Alarm) | Service test print | |
2 times | Green (Power) | EEPROM information print | |
3 times | Orange (Alarm) | EEPROM initialization | |
4 times | Green (Power) | Ink absorber counter resetting | Set a sheet of A4 or Letter sized plain paper in the rear tray or cassette, and reset the ink absorber counter. After the ink absorber counter is reset, the counter value is printed automatically. See "Ink absorber counter resetting" below. |
5 times | Orange (Alarm) | Destination settings | Press the Resume/Cancel button the specified number of time(s) according to the destination. |
6 times | Green (Power) | Print head deep cleaning | Cleaning of both Black and Color |
7 times | Orange (Alarm) | CD / DVD check pattern print | Not used in servicing. |
8 times | Green (Power) | CD / DVD print position correction (horizontal: X direction) | Not used in servicing. |
9 times | Orange (Alarm) | CD / DVD print position correction (vertical: Y direction) | Not used in servicing. |
10 times | Green (Power) | LF / Eject correction | |
11 times | Orange (Alarm) | Left margin correction | |
12 times | Green (Power) | Return to the menu selection | |
13 times | Orange (Alarm) | Register the ink amount in the ink absorber | |
14 to 16 times | Green (Power) / Orange (Alarm) | Return to the menu selection |
Note: If the Resume/Cancel button is pressed 16 or more times, the Alarm LED (orange) lights steadily without any changes.
Destination settings
In the destination settings mode, press the Resume/Cancel button the specified number of time(s) according to the destination listed in the table below, and press the Power button.
Time(s) | LED indication | Destination | CD / DVD print |
0 times | Green (Power) | No change of the destination | |
1 time | Orange (Alarm) | Japan | Supported |
2 times | Green (Power) | Korea | Not supported |
3 times | Orange (Alarm) | US | Not supported |
4 times | Green (Power) | Europe | Supported |
5 times | Orange (Alarm) | Australia | Supported |
6 times | Green (Power) | Asia | Supported |
7 times | Orange (Alarm) | China | Supported |
8 times | Green (Power) | Taiwan | Supported |
9 times | Orange (Alarm) | LAM | Supported |
10 times | Green (Power) | Brazil | Not released |
11 times | Orange (Alarm) | Canada | Supported |
12 times or more | Green (Power) | Return to the menu selection | Supported |
Note: After setting the destination, confirm the model name and destination in service test print or EEPROM data print.
Reset the ink absorber counter (to 0%) when the ink absorber is replaced, or when necessary after the logic board is replaced.
- In the service mode, press the Resume/Cancel button four times, then press the Power button. The ink absorber counter value of the EEPROM is reset to 0%.
- The flag for resetting of the ink absorber counter is set to ON, and the ink absorber counter value is automatically printed from the selected paper source. ("D=000.0" is printed at the top left of the paper.)
- Turn off printer, finish