Now Yous Know Reset Canon Pro-100, Pro-100S
Problem:
Waste ink tank full, waste matter ink pad full, the ink absorber is virtually full, error 5B00, error P07, blink vii times, blink 8 times, the ink absorber becomes almost full, error E08, error E07, error 6C10, error 5B02.
Printer:
Canon Pixma PRO-100, PRO-100S
Reset Canon PRO-100, PRO-100S
Step 1: Enter Service Mode
1. Turn off the printer.
2. Press together with concur the Resume button.
3. Press together with concur the Power button.
4. Release the Resume push (the Power push is yet pressed).
5. Press together with releasing the Resume push iv times.
6. Press together with concur the Resume button.
7. Release the Power together with Resume buttons together.
After the both buttons are released, the ability indicator volition blink light-green for about fourth dimension together with and then the light-green volition lite constantly.
If afterwards follow points 1-7 the light-green lite non constantly simply the printer continues to present an error, it's hateful yous made a fault inwards points 1-7. Turn off the printer together with repeat footstep 1.
Step 2: Reset Canon PRO-100 series
To reset the Canon PRO-100, PRO-100S can endure done amongst (select one):
a. Service Tool v.3200
b. Service Tool v.3400
a. Reset amongst Service Tool v.3200
· Extract file together with opened upwardly Service Tool
· Load paper
· Clear Ink Counter, select MAIN (1)
· Set (2)
· Wait the printer complete printing D=000.0
· Click OK
· Close Service Tool
· Turn off printer (wait ten seconds)
· Turn on printer
· Printer gear upwardly for use
b. Reset amongst Service Tool v.3400
· Extract file together with opened upwardly Service Tool
· Load paper
· Clear Ink Counter, select MAIN (1)
· Set (2)
· Wait the printer complete printing D=000.0
· Click OK
· Close Service Tool
· Turn off printer (wait ten seconds)
· Turn on printer
· Printer gear upwardly for use
