Now Y'all Know Reset Canon Pro-10, Pro-10S
Problem:
Waste ink tank full, waste product ink pad full, the ink absorber is nearly full, error 5B00, error P07, blink seven times, blink 8 times, the ink absorber becomes almost full, error E08, error E07, error 6C10, error 5B02.
Printer:
Canon Pixma PRO-10, PRO-10S
Reset Canon PRO-10, PRO-10S
Step 1: Enter Service Mode
1. Turn off the printer.
2. Press in addition to jibe the Resume button.
3. Press in addition to jibe the Power button.
4. Release the Resume push clit (the Power push clit is however pressed).
5. Press in addition to releasing the Resume push clit iv times.
6. Press in addition to jibe the Resume button.
7. Release the Power in addition to Resume buttons together.
After the both buttons are released, the ability indicator volition blink greenish for to a greater extent than or less fourth dimension in addition to and hence the greenish volition calorie-free constantly.
If later follow points 1-7 the greenish calorie-free non constantly precisely the printer continues to present an error, it's hateful you lot made a error inwards points 1-7. Turn off the printer in addition to repeat footstep 1.
Step 2: Reset Canon PRO-10 series
To reset the Canon PRO-10, PRO-10S can live on done amongst (select one):
a. Service Tool v.3200
b. Service Tool v.3400
a. Reset amongst Service Tool v.3200
· Extract file in addition to opened upward Service Tool
· Load paper
· Clear Ink Counter, select MAIN (1)
· Set (2)
· Wait the printer complete printing D=000.0
· Click OK
· Close Service Tool
· Turn off printer (wait 10 seconds)
· Turn on printer
· Printer hit for use
b. Reset amongst Service Tool v.3400
· Extract file in addition to opened upward Service Tool
· Load paper
· Clear Ink Counter, select MAIN (1)
· Set (2)
· Wait the printer complete printing D=000.0
· Click OK
· Close Service Tool
· Turn off printer (wait 10 seconds)
· Turn on printer
· Printer hit for use
