Now You Lot Know Reset Canon Ip1500, Ip1580
Problem:
Waste ink tank full, waste matter ink pad full, the ink absorber is nearly full, error 5B00, error P07, blink seven times, blink 8 times, the ink absorber becomes almost full, error E08, error E07, error 6C10, error 5B02.
Printer:
Canon Pixma iP1500, iP1580
Reset Canon iP1500, iP1580
Step 1: Enter Service Mode
1. Unplug Power together with USB cables.
2. Open door.
3. Press together with concur the Power button.
4. Connect the Power cable.
5. Close door together with thence loose Power button.
6. Turn ON printer every bit park together with it should last non blinking more.
7. Connect the USB cable.
If afterward follow points 1-6 the dark-green low-cal non constantly exactly the printer continues to demo an error, it's hateful y'all made a error inwards points 1-6. Turn off the printer together with repeat footstep 1.
Step 2: Reset Canon iP1500 series.
To reset the Canon iP1500, iP1580 can last done amongst (select one):
a. General Tool v1.01
b. General Tool v1.18
a. Reset amongst General Tool v1.01
· Extract file together with opened upwards General Tool.
· Select USB Port (1)
· Set Destination 1 (2)
· Load newspaper to the printer
· Check EEPROM CLEAR (3)
· Test Pattern 1 (4), await for the printer to complete printing
· Close General Tool (5)
· Turn off printer (wait ten seconds)
· Turn on printer.
· Printer laid upwards for use
b. Reset amongst General Tool v1.18
· Extract file together with opened upwards General Tool.
· Select USB Port (1)
· Device ID (2)
· Set Destination, select printer model (3)
· Load Paper to the printer
· Clear waste matter ink counter, select MAIN (4), await for the printer to complete printing
· Close General Tool (5)
· Turn off printer (wait ten seconds)
· Turn on printer.
· Printer laid upwards for use.