Now Y'all Know Reset Canon Mp460
Problem:
Waste ink tank full, waste materials ink pad full, the ink absorber is most full, error 5B00, error P07, blink vii times, blink 8 times, the ink absorber becomes almost full, error E08, error E07, E27.
Printer:
Canon Pixma MP460
Reset Canon MP460
Step 1: Enter Service Mode
1. Turn off the printer.
2. Press in addition to concur the Stop/Reset button.
3. Press in addition to concur the On/Off button.
4. Release the Stop/Reset push clit (the On/Off push clit is nonetheless pressed).
5. Press in addition to releasing the Stop/Reset push clit 1 times.
6. Press in addition to concur the Stop/Reset button.
7. Release the On/Off in addition to Stop/Reset buttons together.
After the both buttons are released, the indicator volition blink dark-green for simply about fourth dimension in addition to and thus the dark-green volition low-cal constantly in addition to the printer LCD demo “0”.
If afterwards follow points 1-7 the dark-green low-cal non constantly but the printer continues to demo an error, it's hateful yous made a error inward points 1-7. Turn off the printer in addition to repeat pace 1.
Step 2: Reset Canon MP460
To reset the Canon MP460 can survive done amongst (select one):
a. Manual reset
b. MPTool v0.8.0a
c. MPTool v0.9.6
a. Manual reset
8. Press the Stop/Reset push clit four times (each fourth dimension the Stop/Reset push clit is pressed, the ability indicator changes color).
9. Press the On/Off push clit 1 fourth dimension to confirm the selected activity (reset the absorber counter).
10. Press the On/Off push clit ii times to plough off the printer.
11. Turn on the printer in addition to immediately the printer is laid for use.
Another dominance for points 8:
Press the Stop/Reset button: 1 times – Orange – Service examination impress (load newspaper earlier produce it)
Press the Stop/Reset button: 2 times – Green – EEPROM information impress (load newspaper earlier produce it)
Press the Stop/Reset button: 3 times – Orange – EEPROM initialization
Press the Stop/Reset button: 4 times – Green – Waste ink counter setting
Press the Stop/Reset button: 5 times – Orange – Destination setting (then Press Power, Press Stop/Reset 3x)
Press the Stop/Reset button: 6 times – Green – Print caput deep cleaning
Press the Stop/Reset button: 11-13 times – Orange, Green, Orange – Return to bill of fare selection
Press the Stop/Reset button: 14 times – Green – Left margin correction
b. Reset amongst MPTool v0.8.0a
· Extract file in addition to opened upward MPTool.
· Click printer model (1)
· Waste ink counter, Reset Main (2)
· Exit MPTool (3)
· Turn off printer (wait x seconds)
· Turn on printer.
· Printer laid for use.
c. Reset amongst MPTool v0.9.6
· Extract file in addition to opened upward MPTool.
· Click printer model (1)
· Waste ink counter, Reset Main (2)
· Exit MPTool (3)
· Turn off printer (wait x seconds)
· Turn on printer.
· Printer laid for use.