Now Y'all Know Reset Canon I350, I355
Problem:
Waste ink tank full, waste materials ink pad full, the ink absorber is virtually full, error 5B00, error p07.
Printer:
Canon i350, i355.
Reset Canon i350, i355:
Step 1: Enter Service Mode
1. Turn off the printer.
2. Press too concur the Resume button.
3. Press too concur the Power button.
4. Release the Resume push clitoris (the Power push clitoris is withal pressed).
5. Press too releasing the Resume push clitoris 1 time.
6. Press too concur the Resume button.
7. Release the Power too Resume buttons together.
After the both buttons are released, the ability indicator volition blink greenish for around fourth dimension too thence the greenish volition lite constantly.
If later follow points 1-7 the greenish lite non constantly precisely the printer continues to demo an error, it's hateful y'all made a error inwards points 1-7. Turn off the printer too repeat mensuration 1.
Step 2: Reset Canon i350, i355
To reset the Canon i350, i355 it tin hold upwards done with:
a. General Tool v0.05
b. General Tool v1.01
 |
| General Tool v0.05 |
a. Reset amongst General Tool v0.05
· Download General Tool (support Win XP, Vista, 7, 8, 8.1, 10).
· Extract file too opened upwards General Tool.
· Select USB Port (1)
· Click Device ID (2)
· Set Destination. Click i350/i355 (3)
· Give depository fiscal establishment tally EEPROM CLEAR (4)
· Load newspaper to the printer
· Test Pattern 1 (5) expect for the printing procedure to finish
· Test Pattern ii (6) expect for the printing procedure to finish
· EEP-ROM DUMP (7)
· Close GeneralTool (8)
· Turn off printer (wait ten seconds)
· Turn on printer.
· Printer hit for use.
 |
| General Tool v1.01 |
b. Reset amongst General Tool v1.01
· Download General Tool (support Win XP, Vista, 7, 8, 8.1, 10).
· Extract file too opened upwards General Tool.
· Select USB Port (1)
· Set Destination. Select 1 (2)
· Give depository fiscal establishment tally EEPROM CLEAR (3)
· Load newspaper to the printer
· Test Pattern 1 (4) expect for the printing procedure to finish
· Close General Tool (5)
· Turn off printer (wait ten seconds)
· Turn on printer.
· Printer hit for use.