Now Y'all Know Reset Canon Mp170, Mp178
Problem:
Waste ink tank full, waste matter ink pad full, the ink absorber is near full, error 5B00, error P07, blink vii times, blink 8 times, the ink absorber becomes almost full, error E08, error E07, E27.
Printer:
Canon Pixma MP170, MP178
Reset Canon MP170, MP178
Step 1: Enter Service Mode
1. Turn off the printer.
2. Press as well as concord the Stop/Reset button.
3. Press as well as concord the On/Off button.
4. Release the Stop/Reset push (the On/Off push is withal pressed).
5. Press as well as releasing the Stop/Reset push 1 times.
6. Press as well as concord the Stop/Reset button.
7. Release the On/Off as well as Stop/Reset buttons together.
After the both buttons are released, the indicator volition blink light-green for to a greater extent than or less fourth dimension as well as therefore the light-green volition lite constantly as well as the printer LCD demo “0”.
If subsequently follow points 1-7 the light-green lite non constantly exactly the printer continues to demo an error, it's hateful y'all made a error inwards points 1-7. Turn off the printer as well as repeat pace 1.
Step 2: Reset Canon MP170, MP178
To reset the Canon MP170, MP178 can locomote done amongst (select one):
a. Manual reset
b. MPTool v0.8.0a
c. MPTool v0.9.6
d. Service Tool v.3200
a. Manual reset
8. Press the Stop/Reset push iv times (each fourth dimension the Stop/Reset push is pressed, the ability indicator changes color).
9. Press the On/Off push 1 fourth dimension to confirm the selected activity (reset the absorber counter).
10. Press the On/Off push ii times to plough off the printer.
11. Turn on the printer as well as directly the printer is develop for use.
Another dominance for points 8:
Press the Stop/Reset button: 1 times – Orange – Service exam impress (load newspaper earlier produce it)
Press the Stop/Reset button: 2 times – Green – EEPROM information impress (load newspaper earlier produce it)
Press the Stop/Reset button: 3 times – Orange – EEPROM initialization
Press the Stop/Reset button: 4 times – Green – Waste ink counter setting
Press the Stop/Reset button: 5 times – Orange – Destination setting (then Press Power, Press Stop/Reset 3x)
Press the Stop/Reset button: 6 times – Green – Print caput deep cleaning
Press the Stop/Reset button: 11-13 times – Orange, Green, Orange – Return to bill of fare selection
Press the Stop/Reset button: 14 times – Green – Left margin correction
b. Reset amongst MPTool v0.8.0a
· Extract file as well as opened upwards MPTool.
· Click printer model (1)
· Waste ink counter, Reset Main (2)
· Exit MPTool (3)
· Turn off printer (wait 10 seconds)
· Turn on printer.
· Printer develop for use.
c. Reset amongst MPTool v0.9.6
· Extract file as well as opened upwards MPTool.
· Click printer model (1)
· Waste ink counter, Reset Main (2)
· Exit MPTool (3)
· Turn off printer (wait 10 seconds)
· Turn on printer.
· Printer develop for use.
d. Reset with Service Tool v.3200
· Extract file as well as opened upwards Service Tool
· Load paper
· Clear Ink Counter, select MAIN (1)
· Set (2)
· Wait the printer complete printing D=000.0
· Click OK
· Close Service Tool
· Turn off printer (wait 10 seconds)
· Turn on printer
· Printer develop for use