Now Y'all Know Reset Canon Mp160
Problem:
Waste ink tank full, waste matter ink pad full, the ink absorber is most full, error 5B00, error P07, blink seven times, blink 8 times, the ink absorber becomes almost full, error E08, error E07, E27.
Printer:
Canon Pixma MP160
Reset Canon MP160
Step 1: Enter Service Mode
1. Turn off the printer.
2. Press as well as concur the Stop/Reset button.
3. Press as well as concur the On/Off button.
4. Release the Stop/Reset push (the On/Off push is all the same pressed).
5. Press as well as releasing the Stop/Reset push 1 times.
6. Press as well as concur the Stop/Reset button.
7. Release the On/Off as well as Stop/Reset buttons together.
After the both buttons are released, the indicator volition blink light-green for roughly fourth dimension as well as and hence the light-green volition low-cal constantly as well as the printer LCD exhibit “0”.
If later on follow points 1-7 the light-green low-cal non constantly merely the printer continues to exhibit an error, it's hateful yous made a error inwards points 1-7. Turn off the printer as well as repeat pace 1.
Step 2: Reset Canon MP160
To reset the Canon MP160 can endure done alongside (select one):
a. Manual reset
b. MPTool v0.8.0a
c. MPTool v0.9.6
a. Manual reset
8. Press the Stop/Reset push iv times (each fourth dimension the Stop/Reset push is pressed, the ability indicator changes color).
9. Press the On/Off push 1 fourth dimension to confirm the selected activeness (reset the absorber counter).
10. Press the On/Off push ii times to plough off the printer.
11. Turn on the printer as well as forthwith the printer is create for use.
Another ascendence for points 8:
Press the Stop/Reset button: 1 times – Orange – Service examination impress (load newspaper earlier create it)
Press the Stop/Reset button: 2 times – Green – EEPROM information impress (load newspaper earlier create it)
Press the Stop/Reset button: 3 times – Orange – EEPROM initialization
Press the Stop/Reset button: 4 times – Green – Waste ink counter setting
Press the Stop/Reset button: 5 times – Orange – Destination setting (then Press Power, Press Stop/Reset 3x)
Press the Stop/Reset button: 6 times – Green – Print caput deep cleaning
Press the Stop/Reset button: 11-13 times – Orange, Green, Orange – Return to carte selection
Press the Stop/Reset button: 14 times – Green – Left margin correction
b. Reset alongside MPTool v0.8.0a
· Extract file as well as opened upwards MPTool.
· Click printer model (1)
· Waste ink counter, Reset Main (2)
· Exit MPTool (3)
· Turn off printer (wait ten seconds)
· Turn on printer.
· Printer create for use.
c. Reset alongside MPTool v0.9.6
· Extract file as well as opened upwards MPTool.
· Click printer model (1)
· Waste ink counter, Reset Main (2)
· Exit MPTool (3)
· Turn off printer (wait ten seconds)
· Turn on printer.
· Printer create for use.