Now Yous Know Analysis Of Difficult Disk Bad Sector - Purpose 5/5
3. SMART Failure Predicted on Hard Disk
SMART (Self Monitoring Analysis together with Reporting Technology) is system disk monitor, to detect damage, hoping to avoid data loss in example of disk damage. When the disk is damaged, SMART will provide a warning "SMART Failure Predicted on Hard Disk", Warning: Immediately backup information together with supersede you lot difficult disk drive. Influenza A virus subtype H5N1 failure may last imminent, or Hard disk SMART, status bad, backup together with replace.
When a hard disk is damaged, backup data is a plough over priority. Under weather condition of SMART Failure Predicted on Hard Disk, data can be saved.
1. When PC is turned on, the message "Hard disk SMART Status BAD, Backup and Replace".
2. Restart computer, press Delete key to enter BIOS
3. Change setting SMART Monitoring, from Auto/Enable to Disable
This solution is temporary, by disabling SMART function, damage to the hard disk will last ignored, but nosotros recommend you produce a back-up data.
SMART Failure Predicted on Hard disk, does not happen instantly. SMART Failure on hard disk, occur inwards several stages. SMART failure is the culmination of hard disk damage, which occurs of bad sectors beginning, bad sectors expanded, culminating inwards the SMART Failure Predicted on Hard Disk.
SMART Failure on System Reserved (Windows 7)
See the painting below
Problems, solutions, and the possibility
Problems = corrupt system booting on windows 7
Solution = repair using System Recovery Options, if fails. Last solution is install fresh OS.
Possibility = system will render to normal, but it will be a large problem in the future.
When install fresh re-create OS, arrangement reserved volition last formatted, thus proceed to install OS.
Format arrangement reserved, it tin give the axe non create bad sectors. So, bad sectors yet in that location inwards arrangement reserved (100 Mb). If not corrected, bad sectors will expand. Bad sectors on the system reserved, is very dangerous. In many cases, after repair operating system, one day, system will return corrupt, and bad sectors are becoming to a greater extent than widespread. If bad sectors on the 100 Mb increasingly widespread, in that location volition be SMART Failure Predicted on Hard Disk.
When SMART failure occurs, information inwards C, D, E, F, tin give the axe last accessed normally, similar no harm difficult disk. See the painting below. These cases occurred in 160 Gb Hard disk Western WD1600BEVT.
There are two possibilities, the SMART Failure on Hard Disk
1. SMART Failure occurs because there are very severe bad sectors on the front sectors
2. Restart computer, press Delete key to enter BIOS
3. Change setting SMART Monitoring, from Auto/Enable to Disable
This solution is temporary, by disabling SMART function, damage to the hard disk will last ignored, but nosotros recommend you produce a back-up data.
SMART Failure Predicted on Hard disk, does not happen instantly. SMART Failure on hard disk, occur inwards several stages. SMART failure is the culmination of hard disk damage, which occurs of bad sectors beginning, bad sectors expanded, culminating inwards the SMART Failure Predicted on Hard Disk.
SMART Failure on System Reserved (Windows 7)
See the painting below
Problems = corrupt system booting on windows 7
Solution = repair using System Recovery Options, if fails. Last solution is install fresh OS.
Possibility = system will render to normal, but it will be a large problem in the future.
Format arrangement reserved, it tin give the axe non create bad sectors. So, bad sectors yet in that location inwards arrangement reserved (100 Mb). If not corrected, bad sectors will expand. Bad sectors on the system reserved, is very dangerous. In many cases, after repair operating system, one day, system will return corrupt, and bad sectors are becoming to a greater extent than widespread. If bad sectors on the 100 Mb increasingly widespread, in that location volition be SMART Failure Predicted on Hard Disk.
1. SMART Failure occurs because there are very severe bad sectors on the front sectors
2. SMART Failure occurs because there are very severe bad sectors on the backward sectors
SMART Failure Predicted on Hard disk, tin give the axe last defined;
bad sectors on the difficult disk, spread really quickly. When a bad sector repair, novel bad volition seem elsewhere. So, bad sectors on the difficult drive, is growing really fast. And bad on novel sectors, volition buy the farm along to emerge.
If we are too late to detect damage to disks, SMART Failure will occur. SMART Failure is the culmination of the spread of bad sectors on the disk. If bad sectors can last detected early, SMART failure will non occur.