Now You Lot Know How To Piece Of Occupation Full General Tool V1.29

To operate the General Tool v1.29, come inwards Service Mode outset as well as and then follow instructions bellow
(choose i of the methods you lot use):

Methode 1
Clear Waste Ink Counter Main

• Select USB Port (1)
• Device ID (2)
• Lock Release (3)
• Set Destination, select printer model (4)
• Load Paper to the printer
• Clear waste materials ink counter, select MAIN (5), human face for the printer to complete printing
• Close General Tool (6)
• Turn off printer (wait 10 seconds)
• Turn on printer.
• Printer gain for use

Methode 2
Clear Waste Ink Counter Main as well as Platen

• Select USB Port (1)
• Device ID (2)
• Lock Release (3)
• Set Destination, select printer model (4)
• Load Paper to the printer
• Clear waste materials ink counter, select MAIN (5), human face for the printer to complete printing
• Clear waste materials ink counter, select PLATEN (6), human face for the printer to complete printing
• Close General Tool (7)
• Turn off printer (wait 10 seconds)
• Turn on printer.
• Printer gain for use

Methode 3
EEPROM Clear

• Select USB Port (1)
• Device ID (2)
• Lock Release (3)
• Set Destination, select printer model (4)
• Load Paper to the printer
• Check EEPROM CLEAR (5)
• Test Pattern 1 (6), human face for the printer to complete printing
• Test Pattern two (7), human face for the printer to complete printing
• Test Pattern iii (8), human face for the printer to complete printing
• Close General Tool (9)
• Turn off printer (wait 10 seconds)
• Turn on printer.
• Printer gain for use

Download General Tool v1.29

Note:

• MAIN reset the primary waste materials ink counter.
• PLATEN reset the platen waste materials ink counter.
• If the primary as well as platen waste materials ink absorbers are replaced reset both waste materials ink counters.

Share this post