Now Y'all Know Reset Canon S6300
Waste ink tank full, waste materials ink pad full, the ink absorber is virtually full, error 5B00, error p07
Printer:
Canon S6300
Reset Canon S6300:
Step 1: Enter Service Mode
1. Turn off the printer.
2. Press together with concord the Resume button.
3. Press together with concord the Power button.
4. Release the Resume push (the Power push is even thence pressed).
5. Press together with releasing the Resume push ane time.
6. Press together with concord the Resume button.
7. Release the Power together with Resume buttons together.
After the both buttons are released, the ability indicator volition blink greenish for roughly fourth dimension together with and thence the greenish volition calorie-free constantly.
If afterwards follow points 1-7 the greenish calorie-free non constantly precisely the printer continues to demonstrate an error, it's hateful yous made a fault inward points 1-7. Turn off the printer together with repeat footstep 1.
Step 2: Reset Canon S6300
8. Press the Resume push iv times (each fourth dimension the Resume push is pressed, the ability indicator changes color).
9. Press the Power push ane time to confirm the selected activeness (reset the absorber counter).
10. Press the Power push to plough off the printer.
11. Turn on the printer together with directly the printer is ready for use.
Another ascendence for points 8:
Press the Resume button: 1 times – Orange – Service examination impress (load newspaper earlier produce it)
Press the Resume button: 2 times – Green – EEPROM information impress (load newspaper earlier produce it)
Press the Resume button: 3 times – Orange – EEPROM initialization
Press the Resume button: 4 times – Green – Waste ink counter setting
Press the Resume button: 5 times – Orange – Destination setting (then Press Power, Press Resume 3x)
Press the Resume button: 6 times – Green – Print caput deep cleaning
Press the Resume button: 11-13 times – Orange, Green, Orange – Return to bill of fare selection
Press the Resume button: 14 times – Green – Left margin correction