Now Yous Know Reset Canon Mx360, Mx366, Mx368
Problem:
Waste ink tank full, waste product ink pad full, the ink absorber is close full, error 5B00, error P07, blink seven times, blink 8 times, the ink absorber becomes almost full, error E08, error E07.
Printer:
Canon Pixma MX360, MX366, MX368
Reset Canon MX360, MX366, MX368
Step 1: Enter Service Mode
1. Turn off the printer.
2. Press together with concord the Stop/Reset/Resume button.
3. Press together with concord the Power/On button.
4. Release the Stop/Reset/Resume push (the Power/On push is all the same pressed).
5. Press together with releasing the Stop/Reset/Resume push four times.
6. Press together with concord the Stop/Reset/Resume button.
7. Release the Power/On together with Stop/Reset/Resume buttons together.
After the both buttons are released, the Power/On indicator volition blink dark-green for closed to fourth dimension together with and thence the dark-green volition low-cal constantly.
If later follow points 1-7 the dark-green low-cal non constantly simply the printer continues to present an error, it's hateful you lot made a fault inward points 1-7. Turn off the printer together with repeat footstep 1.
Step 2: Reset Canon MX360 series
To reset the Canon MX360, MX366, MX368 can live on done alongside (select one):
a. Service Tool v.1074
b. Service Tool v.3400
a. Reset alongside Service Tool v.1074
· Extract file together with opened upwards Service Tool
· Load paper
· Clear Ink Counter, click MAIN (1)
· Wait the printer complete printing D=000.0
· Click OK
· Close Service Tool
· Turn off printer (wait ten seconds)
· Turn on printer
· Printer develop for use
b. Reset alongside Service Tool v.3400
· Extract file together with opened upwards Service Tool
· Load paper
· Clear Ink Counter, select MAIN (1)
· Set (2)
· Wait the printer complete printing D=000.0
· Click OK
· Close Service Tool
· Turn off printer (wait ten seconds)
· Turn on printer
· Printer develop for use