Now You Lot Know Reset Canon Mx390, Mx394, Mx395, Mx397
Problem:
Waste ink tank full, waste materials ink pad full, the ink absorber is nearly full, error 5B00, error P07, blink seven times, blink 8 times, the ink absorber becomes almost full, error E08, error E07, error 6C10, error 5B02.
Printer:
Canon Pixma MX390, MX394, MX395, MX397
Reset Canon MX390, MX394, MX395, MX397
Step 1: Enter Service Mode
1. Turn off the printer.
2. Press as well as concord the Resume button.
3. Press as well as concord the Power button.
4. Release the Resume push clit (the Power push clit is nevertheless pressed).
5. Press as well as releasing the Resume push clit v times.
6. Press as well as concord the Resume button.
7. Release the Power as well as Resume buttons together.
After the both buttons are released, the ability indicator volition blink dark-green for roughly fourth dimension as well as and then the dark-green volition low-cal constantly.
If later follow points 1-7 the dark-green low-cal non constantly simply the printer continues to exhibit an error, it's hateful you lot made a error inwards points 1-7. Turn off the printer as well as repeat footstep 1.
Step 2: Reset Canon MX390 series
To reset the Canon MX390, MX394, MX395, MX397 can live on done alongside (select one):
a. Service Tool v.3400
b. Service Tool v.3600
c. Service Tool v.4905
a. Reset alongside Service Tool v.3400
· Extract file as well as opened upwards Service Tool
· Load paper
· Clear Ink Counter, select MAIN (1)
· Set (2)
· Wait the printer complete printing D=000.0
· Click OK
· Close Service Tool
· Turn off printer (wait x seconds)
· Turn on printer
· Printer laid upwards for use
b. Reset alongside Service Tool v.3600
· Extract file as well as opened upwards Service Tool
· Load paper
· Clear Ink Counter, select MAIN (1)
· Set (2)
· Wait the printer complete printing D=000.0
· Click OK
· Close Service Tool
· Turn off printer (wait x seconds)
· Turn on printer
· Printer laid upwards for use
c. Reset alongside Service Tool v.4905
· Extract file as well as opened upwards Service Tool
· Load paper
· Clear Ink Counter, select MAIN (1)
· Set (2)
· Wait the printer complete printing D=000.0
· Click OK
· Close Service Tool
· Turn off printer (wait x seconds)
· Turn on printer
· Printer laid upwards for use