Now You Lot Know Reset Canon Mx340, Mx347
Problem:
Waste ink tank full, waste materials ink pad full, the ink absorber is most full, error 5B00, error P07, blink seven times, blink 8 times, the ink absorber becomes almost full, error E08, error E07, error 6C10, error 5B02.
Printer:
Canon Pixma MX340, MX347
Reset Canon MX340, MX347
Step 1: Enter Service Mode
1. Turn off the printer.
2. Press as well as tally the Resume button.
3. Press as well as tally the Power button.
4. Release the Resume push clit (the Power push clit is yet pressed).
5. Press as well as releasing the Resume push clit v times.
6. Press as well as tally the Resume button.
7. Release the Power as well as Resume buttons together.
After the both buttons are released, the ability indicator volition blink dark-green for to a greater extent than or less fourth dimension as well as and then the dark-green volition low-cal constantly.
If afterward follow points 1-7 the dark-green low-cal non constantly only the printer continues to demonstrate an error, it's hateful y'all made a error inwards points 1-7. Turn off the printer as well as repeat pace 1.
Step 2: Reset Canon MX340 series
To reset the Canon MX340, MX347 can last done alongside Service Tool v.1074
· Extract file as well as opened upwards Service Tool
· Load paper
· Clear Ink Counter, click MAIN (1)
· Wait the printer complete printing D=000.0
· Click OK
· Close Service Tool
· Turn off printer (wait 10 seconds)
· Turn on printer
· Printer laid for use
