Now You Lot Know Reset Canon Mx300, Mx308
Problem:
Waste ink tank full, waste materials ink pad full, the ink absorber is near full, error 5B00, error P07, blink vii times, blink 8 times, the ink absorber becomes almost full, error E08, error E07, error 6C10, error 5B02.
Printer:
Canon Pixma MX300, MX308
Reset Canon MX300, MX308
Step 1: Enter Service Mode
1. Turn off the printer.
2. Press in addition to concur the Resume button.
3. Press in addition to concur the Power button.
4. Release the Resume push (the Power push is all the same pressed).
5. Press in addition to releasing the Resume push ane time.
6. Press in addition to concur the Resume button.
7. Release the Power in addition to Resume buttons together.
After the both buttons are released, the ability indicator volition blink greenish for simply about fourth dimension in addition to and thence the greenish volition lite constantly.
If later follow points 1-7 the greenish lite non constantly but the printer continues to exhibit an error, it's hateful you lot made a error inwards points 1-7. Turn off the printer in addition to repeat pace 1.
Step 2: Reset Canon MX300 series
8. Press the Stop/Reset push four times (each fourth dimension the Stop/Reset push is pressed, the ability indicator changes color).
9. Press the On/Off push ane fourth dimension to confirm the selected activity (reset the absorber counter).
10. Press the On/Off push ii times to plough off the printer.
11. Turn on the printer in addition to instantly the printer is cook for use.
Another ascendancy for points 8:
Press the Stop/Reset button: 1 times – Orange – Service exam impress (load newspaper earlier create it)
Press the Stop/Reset button: 2 times – Green – EEPROM information impress (load newspaper earlier create it)
Press the Stop/Reset button: 3 times – Orange – EEPROM initialization
Press the Stop/Reset button: 4 times – Green – Waste ink counter setting
Press the Stop/Reset button: 5 times – Orange – Destination setting (then Press Power, Press Stop/Reset 3x)
Press the Stop/Reset button: 6 times – Green – Print caput deep cleaning
Press the Stop/Reset button: 11-13 times – Orange, Green, Orange – Return to carte selection
Press the Stop/Reset button: 14 times – Green – Left margin correction
