Now You Lot Know Reset Canon Ip3500
Problem:
Waste ink tank full, waste product ink pad full, the ink absorber is most full, error 5B00, error p07, blink seven times, blink 8 times, the ink absorber becomes almost full, error E08, error E07.
Printer:
Canon Pixma iP3500
Reset Canon iP3500:
Step 1: Enter Service Mode
1. Turn off the printer.
2. Press too represent the Resume button.
3. Press too represent the Power button.
4. Release the Resume push clitoris (the Power push clitoris is nevertheless pressed).
5. Press too releasing the Resume push clitoris 1 time.
6. Press too represent the Resume button.
7. Release the Power too Resume buttons together.
After the both buttons are released, the ability indicator volition blink light-green for around fourth dimension too and therefore the light-green volition lite constantly.
If later on follow points 1-7 the light-green lite non constantly only the printer continues to exhibit an error, it's hateful you lot made a fault inwards points 1-7. Turn off the printer too repeat stride 1.
Step 2: Reset Canon iP3500
To reset the Canon iP3500 tin last done amongst (select one):
a. Manual
b. Service Tool v.1050
a. Manual reset
8. Press the Stop/Reset push clitoris four times (each fourth dimension the Stop/Reset push clitoris is pressed, the ability indicator changes color).
9. Press the On/Off push clitoris 1 fourth dimension to confirm the selected activity (reset the absorber counter).
10. Press the On/Off push clitoris ii times to plough off the printer.
11. Turn on the printer too straightaway the printer is create for use.
Another ascendency for points 8:
Press the Stop/Reset button: 1 times – Orange – Service exam impress (load newspaper earlier create it)
Press the Stop/Reset button: 2 times – Green – EEPROM information impress (load newspaper earlier create it)
Press the Stop/Reset button: 3 times – Orange – EEPROM initialization
Press the Stop/Reset button: 4 times – Green – Waste ink counter setting
Press the Stop/Reset button: 5 times – Orange – Destination setting (then Press Power, Press Stop/Reset 3x)
Press the Stop/Reset button: 6 times – Green – Print caput deep cleaning
Press the Stop/Reset button: 11-13 times – Orange, Green, Orange – Return to carte selection
Press the Stop/Reset button: 14 times – Green – Left margin correction
b. Reset amongst Service Tool v.1050
· Extract file too opened upwards Service Tool
· Select USB Port (1)
· Load paper
· Clear Ink Counter, click MAIN (2)
· Wait the printer complete printing D=000.0
· Click OK
· Close Service Tool
· Turn off printer (wait ten seconds)
· Turn on printer
· Printer create for use