Now Y'all Know Reset Canon Mx420, Mx426
Problem:
Waste ink tank full, waste materials ink pad full, the ink absorber is nearly full, error 5B00, error P07, blink seven times, blink 8 times, the ink absorber becomes almost full, error E08, error E07, error 6C10, error 5B02.
Printer:
Canon Pixma MX420, MX426
Reset Canon MX420, MX426
Step 1: Enter Service Mode
1. Turn off the printer.
2. Press as well as gibe the Resume button.
3. Press as well as gibe the Power button.
4. Release the Resume push clit (the Power push clit is even thus pressed).
5. Press as well as releasing the Resume push clit 1 time.
6. Press as well as gibe the Resume button.
7. Release the Power as well as Resume buttons together.
After the both buttons are released, the ability indicator volition blink light-green for approximately fourth dimension as well as thus the light-green volition low-cal constantly.
If afterwards follow points 1-7 the light-green low-cal non constantly simply the printer continues to demo an error, it's hateful y'all made a error inward points 1-7. Turn off the printer as well as repeat stride 1.
Step 2: Reset Canon MX420 series
To reset the Canon MX420, MX426 can last done amongst Service Tool v.2000
· Extract file as well as opened upward Service Tool
· Load paper
· Clear Ink Counter, click MAIN (1)
· Wait the printer complete printing D=000.0
· Click OK
· Close Service Tool
· Turn off printer (wait x seconds)
· Turn on printer
· Printer laid for use
