Now Y'all Know Reset Canon Mg8100, Mg8120, Mg8140, Mg8150, Mg8170
Problem:
Waste ink tank full, waste product ink pad full, the ink absorber is close full, error 5B00, error P07, blink vii times, blink 8 times, the ink absorber becomes almost full, error E08, error E07, error 6C10, error 5B02.
Printer:
Canon Pixma MG8100, MG8120, MG8140, MG8150, MG8170
Reset Canon MG8100, MG8120, MG8140, MG8150, MG8170
Step 1: Enter Service Mode
1. Turn off the printer.
2. Press as well as gibe the Resume button.
3. Press as well as gibe the Power button.
4. Release the Resume push (the Power push is even hence pressed).
5. Press as well as releasing the Resume push v times.
6. Press as well as gibe the Resume button.
7. Release the Power as well as Resume buttons together.
After the both buttons are released, the ability indicator volition blink light-green for around fourth dimension as well as hence the light-green volition calorie-free constantly.
If afterwards follow points 1-7 the light-green calorie-free non constantly simply the printer continues to demonstrate an error, it's hateful you lot made a fault inwards points 1-7. Turn off the printer as well as repeat footstep 1.
Step 2: Reset Canon MG8100 series
To reset the Canon MG8100, MG8120, MG8140, MG8150, MG8170 can hold upwards done amongst (select one):
a. Service Tool v.2000
b. Service Tool v.3400
c. Service Tool v.3600
d. Service Tool v.4200
e. Service Tool v.4720
f. Service Tool v.4905
a. Reset amongst Service Tool v.2000
· Extract file as well as opened upwards Service Tool
· Load paper
· Clear Ink Counter, click MAIN (1)
· Wait the printer complete printing D=000.0
· Click OK
· Close Service Tool
· Turn off printer (wait ten seconds)
· Turn on printer
· Printer compass for use
b. Reset amongst Service Tool v.3400
· Extract file as well as opened upwards Service Tool
· Load paper
· Clear Ink Counter, select MAIN (1)
· Set (2)
· Wait the printer complete printing D=000.0
· Click OK
· Close Service Tool
· Turn off printer (wait ten seconds)
· Turn on printer
· Printer compass for use
c. Reset amongst Service Tool v.3600
· Extract file as well as opened upwards Service Tool
· Load paper
· Clear Ink Counter, select MAIN (1)
· Set (2)
· Wait the printer complete printing D=000.0
· Click OK
· Close Service Tool
· Turn off printer (wait ten seconds)
· Turn on printer
· Printer compass for use
d. Reset amongst Service Tool v.4200
· Extract file as well as opened upwards Service Tool
· Load paper
· Clear Ink Counter, select MAIN (1)
· Set (2)
· Wait the printer complete printing D=000.0
· Click OK
· Close Service Tool
· Turn off printer (wait ten seconds)
· Turn on printer
· Printer compass for use
e. Reset amongst Service Tool v.4720
· Extract file as well as opened upwards Service Tool
· Load paper
· Clear Ink Counter, select MAIN (1)
· Set (2)
· Wait the printer complete printing D=000.0
· Click OK
· Close Service Tool
· Turn off printer (wait ten seconds)
· Turn on printer
· Printer compass for use
f. Reset amongst Service Tool v.4905
· Extract file as well as opened upwards Service Tool
· Load paper
· Clear Ink Counter, select MAIN (1)
· Set (2)
· Wait the printer complete printing D=000.0
· Click OK
· Close Service Tool
· Turn off printer (wait ten seconds)
· Turn on printer
· Printer compass for use